EQUIPMENT ESTIMATE
Mini Split and HVAC Service: Tool List and Cost Estimate
Installing and servicing mini splits takes a vacuum pump, manifold gauges and line sets, and a recovery machine for service work. Here is what each tool does, what people get wrong, and an example list from our catalog.
Estimate this for my job See the example estimate
1. What the job takes
Vacuum pump Core
Evacuates air and moisture from the system before charging. Check that it is listed for the refrigerants you work with.
Manifold gauges Core
Read system pressures and connect the pump. Check refrigerant and fitting compatibility.
Refrigerant recovery machine
Removes refrigerant from a system for service. Check which refrigerants it is listed for.
Line set
Insulated copper tubing between the indoor and outdoor units. Diameters and length must match the unit.
Tube bender
Bends tubing without kinking it.
Common mistakes
- Buying a chamber vacuum sealer. It is a food packaging machine, not an HVAC vacuum pump.
- Buying a pump and a gauge kit that already includes a pump, without meaning to.
- Ordering a line set before checking the tubing diameters the unit needs.
- Assuming a tool covers every refrigerant. Check the list on the product page.
2. Purchasing list: an example from our catalog
The request behind this estimateI am starting to install and service mini split air conditioners. I need a vacuum pump, manifold gauges, a refrigerant recovery machine and line sets.
-
Vacuum pump and manifold gauges
Vacuum Pump 4.8CFM 1/4 HP Single Stage HVAC A/C Refrigeration Kit 5PA Ultimate Vacuum Manifold Gauge Set R12 R404A R410A
One kit covers both needs: a 4.8 CFM single-stage vacuum pump with dual-pressure manifold gauges and four hoses. The product title lists R12, R404A and R410A; confirm it suits the refrigerant in your units.
$139.90In stock View product -
Line set and tubing
Mini Split Line Set, 25ft 3/8” & 5/8” OD AC Copper Tubing Pipe, 3/8 White PE Thickened Insulated Coil with Flared Nuts
The set is 25 ft long with 3/8-inch and 5/8-inch tubing and flared nuts. The required tubing sizes and run length were not specified and should be confirmed.
$159.99In stock View product
Get elsewhere: not supplied by MyDepot
- Refrigerant recovery. The recovery machine candidate is described for automotive use, and its compatibility with mini split refrigerants is not stated.
What else the job takes: not supplied by MyDepot
Installation, hookups, consumables, permits and trades this job usually needs. Rules differ by city and state, so check locally. Run the estimate for your job to see reference prices where we have them. Added November 16, 2026 · Reviewed by MyDepot staff on November 16, 2026.
EPA refrigerant certificationPermitsPrepare
Attaching gauges to a refrigerant circuit, recovering refrigerant and buying most refrigerants require EPA Section 608 certification (Section 609 for vehicle air conditioning).
Recovery cylinderOther costsPrepare
A refillable DOT-approved recovery cylinder for the refrigerant taken out, never a disposable one.
RefrigerantMaterialsDo the job
Only if the system needs charging: the refrigerant named on the unit nameplate, in the amount the maker specifies.
This figure covers the MyDepot items above at current prices. Materials, labor and anything MyDepot does not supply are not in it; shipping and tax are added at checkout. For your own job, AI Estimate lists the whole job and prices what it can.
Questions
- Does MyDepot sell refrigerant scales, flaring tools or refrigerant leak detectors?
- No. The leak detectors in our catalog are for water pipes, not refrigerant.
- Do I need a licence to handle refrigerant?
- In the United States, people who service or dispose of equipment containing regulated refrigerants need EPA Section 608 certification. Check the rules that apply to you.
- Why does the example list leave out a recovery machine?
- When the advisor cannot confirm from the product page that an item suits the job, it leaves it out and says why. The list shows what was left out.

